Shop - Pike Industries

Victron Energy MultiPlus-II 120V, 3000VA 48-Volt Pure Sine Wave Inverter and 30 Amp DC Battery Charger

Trent — Mon, 30 Dec 2024 16:49:18 +0000

VICTRON ENERGY PURE SINE WAVE INVERTER: The MultiPlus-II inverter charger combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.
POWER ASSIST: With the unique Power Assist feature the MultiPlus-II solar inverter will prevent overload of a limited AC source, such as a generator or shore power connection
POWER WITHOUT INTERRUPTION: In the event of a grid failure, or when shore or generator power is disconnected, the Victron inverter is activated fast, within 20ms, and takes over the supply to the connected loads
PARALLEL OPERATION: Up to 6 Victron Energy MultiPlus-II Pure Sine Wave Inverter units can operate in parallel to achieve higher power output, In addition to parallel connection, three units can be configured for three-phase output.
PROFESSIONAL INVERTER CHARGER: The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications

The post Victron Energy MultiPlus-II 120V, 3000VA 48-Volt Pure Sine Wave Inverter and 30 Amp DC Battery Charger appeared first on Pike Industries.

Ruuvi Gateway – Sensor data router for RuuviTag sensors

matt — Mon, 12 Feb 2024 18:26:40 +0000

Complete Solution for All Monitoring. With Ruuvi Gateway, you can read your Ruuvi sensors from anywhere in the world. Connect your Gateway to the Internet via Wi-Fi (WLAN) or Ethernet, and you won’t ever again need to worry about being out of Bluetooth range. Ruuvi Gateway is fully compatible with all Ruuvi sensors, old and new. The Cloud enables remote monitoring via the Internet with trusted email alerts and longer history. With Ruuvi Gateway you will also get a longer Bluetooth range for your sensors.

The post Ruuvi Gateway – Sensor data router for RuuviTag sensors appeared first on Pike Industries.

RuuviTag Pro 2in1 Wireless Bluetooth Temperature (°C/°F), and Motion Sensor

matt — Mon, 12 Feb 2024 18:24:22 +0000

Measures temperature and motion. Water protection level: IP68 + IP69K (hot pressurised spray). RuuviTag Pro fits perfectly with demanding industrial and serious home uses. RuuviTag Pro is a rugged IP-certified environmental sensor for temperature, air humidity, air pressure and acceleration monitoring. The Pro is based on RuuviTag’s successful concept and additionally brings several new outstanding features to the table. RuuviTag Pro is the toughest open source sensor on the market.

Measures Temperature (°C and °F) and Motion
Very high accuracy temperature sensor Texas Instruments TMP117
Easy to use, Free App for Android and iOS
Integrates to Victron, Homey, and Home Assistant
IP68 / IP69K housing, Professional mounting, and industrial design

The post RuuviTag Pro 2in1 Wireless Bluetooth Temperature (°C/°F), and Motion Sensor appeared first on Pike Industries.

RuuviTag Pro 3in1 Wireless Bluetooth Temperature (°C/°F), Air Humidity and Motion Sensor

matt — Mon, 12 Feb 2024 18:18:48 +0000

RuuviTag Pro is a rugged IP-certified environmental sensor for temperature, air humidity, air pressure, and acceleration monitoring. The Pro is based on RuuviTag’s successful concept and additionally brings several new outstanding features to the table. RuuviTag Pro is the toughest open-source sensor on the market.

RuuviTag Pro has two strong mounting ears that allow reliable installation methods to be used. Wooden ceilings, drywall, concrete foundations, you name it. Attach and measure professionally wherever you need to.

Measures Temperature (°C and °F), Air Humidity, and Motion
Very high accuracy temperature sensor Texas TMP117
Easy to use, replaceable battery, Free App for Android and iOS
Integrates to Victron, Homey, and Home Assistant
Wide operating temperature range -40°C to +85°C (-40°F…185°F)
IP67 housing, professional mounting, and industrial design

The post RuuviTag Pro 3in1 Wireless Bluetooth Temperature (°C/°F), Air Humidity and Motion Sensor appeared first on Pike Industries.

RuuviTag 4in1 Wireless Bluetooth Temperature (°C/°F), Air Humidity, Air Pressure and Motion Sensor

matt — Mon, 12 Feb 2024 18:12:32 +0000

Measure and monitor your home, holiday house, and belongings. You may also save on electricity consumption and heating costs with Ruuvi. Start measuring and ease your everyday life.

High quality thermometer and hygrometer. Measures Temperature (°C and °F), Air Humidity, Air Pressure and Motion
High quality sensors: ±0.2°C, ±2%RH (in a room temperature)
Integrates to Victron, Homey, and Home Assistant
Wide operating temperature range -20°C to +70°C (-4°F…158F)
Easy to use, Free App for Android and iOS
IP67 housing
Remote monitoring available with Ruuvi Gateway

The post RuuviTag 4in1 Wireless Bluetooth Temperature (°C/°F), Air Humidity, Air Pressure and Motion Sensor appeared first on Pike Industries.

Victron Energy Lynx Smart BMS 500 AMP

matt — Fri, 09 Feb 2024 16:26:26 +0000

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).

The main features are:

Built-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.
Battery monitor, indicating state of charge percentage and more data.
Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.
Bluetooth for use with our VictronConnect App, for setup and monitoring, including Instant Readout – key data of the BMS at-a-glance.
Local and remote monitoring using a Victron GX device, for example the Cerbo GX or Ekrano GX.

The Lynx Smart BMS is part of the modular Lynx Distribution system.

The post Victron Energy Lynx Smart BMS 500 AMP appeared first on Pike Industries.

Victron Energy SmartShunt IP65 2000 AMP Battery Monitor (Bluetooth)

matt — Fri, 09 Feb 2024 16:26:26 +0000

Victron Energy SmartShunt IP65 is an all-in-one battery monitor, only without a display. Your phone acts as the display. Victron Energy SmartShunt IP65 connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively, the SmartShunt IP65 can be connected and be read by a Victron Energy GX device. Connection to the Victron Energy SmartShunt is made via a VE.Direct cable. Victron Energy SmartShunt IP65 is a good alternative for a Victron Energy BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. Victron Energy SmartShunt IP65 is equipped with Bluetooth, has a VE.Direct port and an auxiliary connection that can be used to monitor a second battery, for midpoint monitoring, or to connect a temperature sensor. Victron Energy SmartShunt IP65 is water resistant and is available in a 500 amp, 1000 amp or 2000 amp version.

The post Victron Energy SmartShunt IP65 2000 AMP Battery Monitor (Bluetooth) appeared first on Pike Industries.

Victron Energy Phoenix Inverter VE.Direct Control Panel On/OFF Switch

matt — Fri, 09 Feb 2024 16:26:25 +0000

This panel is intended for remote on/off control of all the VE.Direct Phoenix inverter models. Utilizing the H/L remote pins on the inverter.

The post Victron Energy Phoenix Inverter VE.Direct Control Panel On/OFF Switch appeared first on Pike Industries.

Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Zinc, Black) Common Bus, Terminal Block

matt — Fri, 09 Feb 2024 16:26:25 +0000

Solid copper BusBar for RV, boat & Marine, home, and automotive use in 12-48 volt DC applications. 400 Amp rated, continuous duty cycle, designed to meet increased ampacity requirements when 3000W 12V Inverters are fed by multiple sources through a common busbar, (solar, battery, generator, etc..) Fully rebuildable injection molded ABS Insulator is designed for maximum stability with a wide 4 hole mounting base, (mounting screws included), and impact resistance. High quality materials used for studs, flange nuts, and mounting fasteners. Standard duty models use Grade 5 or higher, Zinc plated steel fasteners, and Marine rated models use 316 Stainless Steel hardware (316 stainless alloy is suitable for saltwater and corrosive environments whereas 304 stainless used by other manufacturers requires frequent cleaning)

The post Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Zinc, Black) Common Bus, Terminal Block appeared first on Pike Industries.

Victron Energy SmartShunt 1000 AMP Battery Monitor (Bluetooth)

matt — Fri, 09 Feb 2024 16:26:25 +0000

Victron Energy SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. Victron Energy SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively Victron Energy SmartShunt can be connected and be read by a Victron Energy GX device. Connection to the Victron Energy SmartShunt is made via a VE.Direct cable. Victron Energy SmartShunt is a good alternative for a Victron Energy BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. Victron Energy SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.

The post Victron Energy SmartShunt 1000 AMP Battery Monitor (Bluetooth) appeared first on Pike Industries.