Busbars Archives - Pike Industries

Victron Energy Lynx Smart BMS 500 AMP

matt — Fri, 09 Feb 2024 16:26:26 +0000

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).

The main features are:

Built-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.
Battery monitor, indicating state of charge percentage and more data.
Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.
Bluetooth for use with our VictronConnect App, for setup and monitoring, including Instant Readout – key data of the BMS at-a-glance.
Local and remote monitoring using a Victron GX device, for example the Cerbo GX or Ekrano GX.

The Lynx Smart BMS is part of the modular Lynx Distribution system.

The post Victron Energy Lynx Smart BMS 500 AMP appeared first on Pike Industries.

Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Zinc, Black) Common Bus, Terminal Block

matt — Fri, 09 Feb 2024 16:26:25 +0000

Solid copper BusBar for RV, boat & Marine, home, and automotive use in 12-48 volt DC applications. 400 Amp rated, continuous duty cycle, designed to meet increased ampacity requirements when 3000W 12V Inverters are fed by multiple sources through a common busbar, (solar, battery, generator, etc..) Fully rebuildable injection molded ABS Insulator is designed for maximum stability with a wide 4 hole mounting base, (mounting screws included), and impact resistance. High quality materials used for studs, flange nuts, and mounting fasteners. Standard duty models use Grade 5 or higher, Zinc plated steel fasteners, and Marine rated models use 316 Stainless Steel hardware (316 stainless alloy is suitable for saltwater and corrosive environments whereas 304 stainless used by other manufacturers requires frequent cleaning)

The post Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Zinc, Black) Common Bus, Terminal Block appeared first on Pike Industries.

Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Stainless, Black) Common Bus, Terminal Block

matt — Fri, 09 Feb 2024 16:26:24 +0000

The post Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Stainless, Black) Common Bus, Terminal Block appeared first on Pike Industries.

Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Stainless, Red) Common Bus, Terminal Block

matt — Fri, 09 Feb 2024 16:26:24 +0000

The post Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Stainless, Red) Common Bus, Terminal Block appeared first on Pike Industries.

Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Zinc, Red) Common Bus, Terminal Block

matt — Fri, 09 Feb 2024 16:26:24 +0000

The post Pike Industries 400 Amp Solid Copper Busbar 4 Stud (5/16″ Zinc, Red) Common Bus, Terminal Block appeared first on Pike Industries.

Victron Energy Lynx Distributor M8

matt — Fri, 09 Feb 2024 16:26:15 +0000

Victron Energy Lynx Distributor is a modular DC busbar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Connections are M8 sized.

Victron Energy Lynx Distributor contains a positive and negative bus-bar and provides a connection for 4 individual DC equipment circuits, loads or DC groups
It has a space for individual DC fuses per DC group and there is an optional feature of an LED for each fuse to indicate if fuse is blown
It will monitor the status of each fuse, and indicate its condition with a LED on the front
If you wish to use the fuse indication LEDs on the Victron Energy Lynx Distributor, it also requires a connection to a Victron Energy Lynx Shunt
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation

The post Victron Energy Lynx Distributor M8 appeared first on Pike Industries.

Victron Energy Lynx Power In Battery Connector M8

matt — Fri, 09 Feb 2024 16:26:03 +0000

Victron Energy lynx power in module is used to connect batteries via an external fuse, It can be useful if you have multiple parallel strings
Victron Energy Lynx Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables
It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections
A modular DC bus bar, the Victron Energy Lynx Power In is used to connect batteries to the Victron Energy Lynx DC distribution system
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation

The post Victron Energy Lynx Power In Battery Connector M8 appeared first on Pike Industries.

Victron Energy Lynx Shunt IP22 VE.Can 1000 Amp

matt — Fri, 09 Feb 2024 16:26:02 +0000

Victron Energy Lynx Shunt VE.Can is an intelligent 1000 amp shunt with location for a fuse (not included)
Victron Energy Lynx shunt contains a positive bus-bar with space to mount a CNN fuse and a negative bus-bar with a shunt
The built-in battery monitor accurately monitors the state of charge of your battery
Victron Energy Lynx Shunt VE.Can has VE.Can communication for monitoring and setup with a Victron Energy GX device
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation

The post Victron Energy Lynx Shunt IP22 VE.Can 1000 Amp appeared first on Pike Industries.